This is the heavy duty version of the top quality kit we have been selling since 2015 .
My testing began several years before that. We have real experience,
combined with the history of many owners. It will allow you to tailor
the fit your impeller, so it slings all of the snow or slush up the
chute and away. Throwing distance will be significantly farther and
clogging will be reduced greatly. This is a universal kit intended for use on any machine brand that will accommodate it. This auction is for machines with 3-blade impellers. For each impeller blade the following parts are included: COMPOSITE VANE MATERIAL-
The vanes are fabricated from a proven industrial material used in
mining equipment. The outer layers are very wear resistant while the
inner core provides strength without becoming brittle. SIZE-
4 inches long, .35 inches thick (almost 3/8" thick), 1-7/8 inches wide. These are stiff enough for any machine. MOUNTING SLOTS-
Our kits were the first kit to introduce vane slots. The slots provide
flexibility to tune your installation and allow you to advance the vanes
if they ever do wear. Four slots provide more flexibility in your
installation. If a gusset or rib is in the way you can skip a hole and
still have 3. If you need to trim the vane you have more options. MANUFACTURING-
Vanes
are fabricated in the U.S.A. with digitally controlled machines that
ensure consistent parts. This means they will not cause an imbalance of
your impeller. CLAMP PLATE BAR MATERIAL-
Stainless steel for durability. HOLES-
Holes are sized to accurately guide your drilling and to mate with the
vanes. These are purpose specific parts, no extra holes. They support
the full length of the vane MANUFACTURING-
Vanes are
fabricated in the U.S.A. with digitally controlled machines that ensure
consistent parts. This means they will not cause an imbalance of your
impeller. HARDWARE MATERIAL-
Zinc plated steel for durability and serviceability NUTS –
Lock-nuts so they do not need to be over-tightened BOLTS-
Hex
head so you can use wrenches, sockets, or nut drivers in tight
quarters. Bolts are 1 inch long to accommodate stamped impeller ribs. Kits are in stock, and we ship with 1 day handling time.
I
have these on some machines in my collection and they really make a big
difference in all sorts of snow. The ability to handle wet slushy snow
is greatly enhanced. I’m not just a seller, I have been in the industry
since 1972. Every installation is unique but general instructions are included to help you install your kit. Some installations may require you to trim the parts to fit, and that's Okay! This is a common Do It Yourself (DIY) project done in place working mainly through the chute opening. If you will have your machine apart with the impeller out on the bench, that's a great time for this project. Some tools are needed. Usually a drill with bits, a C-Clamp or 2, and some small wrenches will get it done. Be sure to disable the engine by disconnecting the spark plug when you are working. Vanes should be installed and adjusted so they almost touch the side wall at the tightest spot. The
first time you run the machine with new vanes get them wet with
soapy water (or snow) to lubricate them while any contact points
break in. Made in and shipped from the United States.
This
kit may be used to enhance machines of many brands including; LawnBoy,
Mastercraft, Plymouth, Marshal Wells, Beaver, New Holland, Snow Charger,
Ford, Montgomery Ward, Wizard, Senator, Toyota, Artisan, TECO, Garden
Mark, Brentwood, Mor-power, Gambles, SNOTRAC, Bob-a-Lawn, Davis, Gilson,
Toro, Wheel Horse, Ariens, Gravely, Hahn Eclipse, Simplicity, Allis
Chalmers, Snapper, MTD, Cub Cadet, White, Yardman, Yard Machines,
Troy-Bilt, Bolens, Snow chief, Atlas, Snow Bird, Frontier, John Deere,
AMP, Murray, Poloron, Dynamark, Noma, Husqvarna, Craftsman, Sears, Roper
and others.
Returns Accepted for this item if it's within 30 Days