Notify me when the price drops
We will email you if we find a lower price on this product!
- Got an older two-stage snow blower that isn't throwing snow like it used to?
- Frustrated with your discharge chute clogging up every time the snow gets wet or too heavy?
The Problem:
If your TWO-STAGE snow blower’s discharge chute keeps clogging up when you try to move very heavy or wet snow or slush, it is probably because of a large gap or space between the impeller blades (the 2nd set of vertical blades behind the main front horizontal auger blades) and the cylindrical chamber in which it rotates. This "gap" allows snow and slush to slip by the blades and build up around the impeller and in the discharge chute clogging it.
This "gap" allows snow and slush to slip by the blades and build up around the impeller and in the discharge chute clogging it. This gap also decreases the efficiency of the impeller's ability to propel the snow up the chute resulting in less throwing distance. This problem is well known to people with two-stage snow blowers, and the easy and the quick, inexpensive fix is to modify the impeller blades by adding a strip of reinforced rubber to each one of them to eliminate this gap. It is HIGHLY recommended that you install a Snow Blower Impeller Kitâ„¢ on each blade however, because only modifying some but not all of the blades will cause a harmonic imbalance in the spinning impeller which could easily cause excessive wear on the impeller shaft bearing resulting in very costly repairs! If you have a single-stage snow blower, or your gap is less than 1/4" or greater than 5/8", you probably don't need or can't use this fix. (See FAQs below)
The Solution:
Install this Snow Blower Impeller Kitâ„¢ onto your two-stage snow blower and never fear another snow fall again!
Virtually eliminate the “clogged chuteâ€